Skip to content

Convert latitude and longitude to State Plane coordinates

Paste GPS latitude and longitude, pick the State Plane zone, read the easting and northing in feet or metres right below.

QGIS

AI Agent for QGIS

Got a list of coordinates? Ask AI Agent in QGIS to put them on a map, in the right projection.

Get the free QGIS plugin

Free plan, no credit card.

Frequently asked questions

What is the State Plane Coordinate System?

State Plane (SPCS) is the set of flat grids the United States uses for surveys, deeds, engineering plans and county GIS. Each state has one to ten zones, each with its own projection so distortion stays under 1 part in 10,000. Coordinates are an easting and a northing in feet or metres from the zone's origin.

Which State Plane zone is my data in?

The file, the plan or the county GIS metadata names it, usually as a state and a zone (California zone 3, Texas North Central) or an EPSG code (2227, 2276). The zone follows county lines, so the county of the site decides it. If you only have numbers, the size helps: feet values are about 3.28 times the metre values of the same zone.

US survey feet or international feet?

Most states defined State Plane in US survey feet (ftUS), 1200/3937 m. Arizona, Michigan, Montana, North Dakota, Oregon, South Carolina and Utah use the international foot, 0.3048 m. The two differ by 2 parts per million, about 1 m on a 2,000,000 ft easting, so pick the zone whose name carries the unit your data uses: (ftUS) or (ft).

Is NAD83 the same as WGS 84?

Close, not equal: the two differ by 1 to 2 m in the United States today, because NAD83 is fixed to the North American plate. This page treats them as equal, the way GPS phones and web maps do. For survey-grade work, run the conversion in QGIS with the NAD83(2011) or NADCON 5 grids your project names.

Show all 5 questions

Can I convert a whole list or a CSV?

Yes. Paste up to thousands of lines, one point per line, or drop a CSV or TXT: every point converts at once, shows on the map and downloads as CSV, KML or GeoJSON. To reproject a Shapefile, KML or GeoJSON into State Plane, use the format converter, which writes the matching .prj.

About this tool

Paste latitude and longitude, choose the State Plane zone of the county, and the table gives the easting and northing: 40.6892, -74.0445, the Statue of Liberty, is 971909.00, 190373.72 in New York Long Island (ftUS, EPSG:2263). Search the To list by state name or EPSG code.

How to do it

  1. From is WGS 84, latitude and longitude, and To is NAD83 / New York Long Island (ftUS), EPSG:2263. Type your state or the EPSG code in the To box and pick the zone your plans use, in feet (ftUS or ft) or in metres.
  2. Paste the coordinates, one point per line, latitude first: 40.6892, -74.0445. Decimal degrees and degrees, minutes and seconds with N S E W letters both work.
  3. Read the easting and northing, with three decimals. Copy the results or download them as CSV, KML or GeoJSON, and check each point on the map.

Worked examples

Three landmarks converted with this tool into the State Plane zone of their county, in US survey feet.

PlaceSystemInputResult
New York, Statue of LibertyEPSG:226340.6892, -74.0445971909.005, 190373.715
San Francisco, Golden Gate BridgeEPSG:222737.8199, -122.47835990283.754, 2127045.518
Chicago, Willis TowerEPSG:343541.8789, -87.63591174180.795, 1899232.837