Skip to content

Convert State Plane coordinates to latitude and longitude

Pick the zone, paste eastings and northings in feet or metres, read latitude and longitude right below. Every NAD83 zone of the 50 states and Puerto Rico.

QGIS

AI Agent for QGIS

Got a list of coordinates? Ask AI Agent in QGIS to put them on a map, in the right projection.

Get the free QGIS plugin

Free plan, no credit card.

Frequently asked questions

What is the State Plane Coordinate System?

State Plane (SPCS) is the set of flat grids the United States uses for surveys, deeds, engineering plans and county GIS. Each state has one to ten zones, each with its own projection so distortion stays under 1 part in 10,000. Coordinates are an easting and a northing in feet or metres from the zone's origin.

Which State Plane zone is my data in?

The file, the plan or the county GIS metadata names it, usually as a state and a zone (California zone 3, Texas North Central) or an EPSG code (2227, 2276). The zone follows county lines, so the county of the site decides it. If you only have numbers, the size helps: feet values are about 3.28 times the metre values of the same zone.

US survey feet or international feet?

Most states defined State Plane in US survey feet (ftUS), 1200/3937 m. Arizona, Michigan, Montana, North Dakota, Oregon, South Carolina and Utah use the international foot, 0.3048 m. The two differ by 2 parts per million, about 1 m on a 2,000,000 ft easting, so pick the zone whose name carries the unit your data uses: (ftUS) or (ft).

Is NAD83 the same as WGS 84?

Close, not equal: the two differ by 1 to 2 m in the United States today, because NAD83 is fixed to the North American plate. This page treats them as equal, the way GPS phones and web maps do. For survey-grade work, run the conversion in QGIS with the NAD83(2011) or NADCON 5 grids your project names.

Show all 6 questions

Can I convert a whole list or a CSV?

Yes. Paste up to thousands of lines, one point per line, or drop a CSV or TXT: every point converts at once, shows on the map and downloads as CSV, KML or GeoJSON. To reproject a Shapefile, KML or GeoJSON into State Plane, use the format converter, which writes the matching .prj.

How do I convert latitude and longitude to State Plane?

Press the swap button so From is WGS 84 and To is your State Plane zone, then paste latitude and longitude: 40.6892, -74.0445 gives 971909.00, 190373.72 in New York Long Island (ftUS). A whole list converts at once.

About this tool

Choose the State Plane zone, paste an easting and a northing, and the table gives latitude and longitude in WGS 84: 971909.00, 190373.72 in New York Long Island (ftUS, EPSG:2263), the Statue of Liberty, is 40.6892, -74.0445. Search the From list by state name or EPSG code.

How to do it

  1. From is set to NAD83 / New York Long Island (ftUS), EPSG:2263. Type your state or the EPSG code in the From box and pick the zone your data names, in feet (ftUS or ft) or in metres.
  2. Paste the coordinates, one point per line, easting first: 971909.00, 190373.72. A space, a comma, a tab or a semicolon between the two numbers all work, and so does a column copied from a spreadsheet.
  3. Read latitude and longitude in decimal degrees, with degrees, minutes and seconds next to them. Copy the results or download them as CSV, KML or GeoJSON, and check each point on the map.

Worked examples

Three landmarks converted with this tool, each from the State Plane zone of its county, in US survey feet.

PlaceSystemInputResult
New York, Statue of LibertyEPSG:2263971909.00, 190373.7240.6892000, -74.0445000 (40°41'21.12"N 74°02'40.20"W)
San Francisco, Golden Gate BridgeEPSG:22275990283.75, 2127045.5237.8199000, -122.4783000 (37°49'11.64"N 122°28'41.88"W)
Chicago, Willis TowerEPSG:34351174180.80, 1899232.8441.8789000, -87.6359000 (41°52'44.04"N 87°38'09.24"W)