Skip to content
QGIS

AI Agent for QGIS

Ask AI Agent in QGIS for contours, hillshade or slope over your own project area.

Get the free QGIS plugin

Free plan, no credit card.

Frequently asked questions

Is this slope map generator free?

Yes. No account, no watermark and no limit on downloads. Each area can be up to 400 km², about 20 by 20 km.

How is the slope calculated?

From the Copernicus 30 m elevation model, with Horn's method: for each cell, the height change across its eight neighbours divided by their distance on the ground. It is the method of QGIS, GDAL and ArcGIS, so the values match theirs on the same model.

How do I convert a slope from degrees to percent?

Percent is the tangent of the angle times 100. 45° is 100 %, 30° is about 58 %, 15° about 27 %, 5° about 9 %. Switch the unit in the tool: the legend, the values under the mouse and the files follow.

Which file formats can I download?

A GeoTIFF with one slope value per cell, in degrees or percent, in WGS 84 (EPSG:4326), and a CSV with the share of the area in each slope class, in percent and km².

Show all 6 questions

Does it work outside Europe?

Yes. The elevation model covers every land area on Earth, from the Andes to Java.

Why do forests and towns show steep slopes?

The model measures the top of trees and buildings, not the bare ground, so their edges read as steep steps. In open land and mountains the slope follows the terrain.

About this tool

This tool computes the slope of the area you pick, anywhere on Earth, from the Copernicus DEM GLO-30 elevation model, with the same method as QGIS and GDAL. It colours the ground in seven classes from flat to cliff, gives the mean and the steepest slope, and the share of the area in each class. Switch between degrees and percent, then download the slope values as a GeoTIFF or the class table as CSV.

Copernicus DEM GLO-30 · areas up to 400 km² · degrees or percent · GeoTIFF and CSV · no account

How it works

  1. Search a place, then drag the square to fit what you need, or draw a new one. Any area up to 400 km², about 20 by 20 km, works.
  2. The tool reads the Copernicus elevation model under the box, about one value every 30 m, and computes the slope of each cell from its eight neighbours.
  3. Read the share of each class, switch between degrees and percent, then download the slope as a GeoTIFF or the class table as CSV.

Slope in degrees or percent

Degrees measure the angle with the horizontal, from 0 for flat ground to 90 for a vertical wall. Percent is the rise over the run times 100: a 10 % slope climbs 10 m every 100 m. Roads, ramps and drainage use percent; geology, hazard and avalanche maps use degrees.

45° is 100 %. 5° is about 9 %, 15° about 27 %, 30° about 58 %. Past 45° the percent value grows fast: 60° is 173 %.

What the slope classes mean

Under 2° the ground is flat. From 2 to 5° it is gentle: fields, roads and most building plots. From 5 to 10° it is moderate, and from 10 to 15° strong, the usual limit for farm machinery and for building without terracing. From 15 to 30° it is steep, from 30 to 45° very steep, the ground where avalanches and landslides start. Above 45° it is rock or cliff.

Where the elevations come from

Copernicus DEM GLO-30 is a global elevation model from the European Space Agency and Airbus, built from TanDEM-X radar between 2011 and 2015. It covers every land area at 1 arc second, about 30 m.

The slope of each cell comes from Horn's method, the one used by QGIS (Raster > Analysis > Slope), GDAL and ArcGIS: the height change across its eight neighbours, east to west and north to south, divided by their distance on the ground.

Copernicus DEM GLO-30 (c) DLR e.V. 2010-2014 and (c) Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; all rights reserved. Licence

Open the slope in QGIS

Drag the GeoTIFF onto the QGIS map. Each cell holds the slope in the unit you picked. To colour it, open Symbology, pick Singleband pseudocolor and a red ramp. Raster > Analysis > Slope gives the same values from your own elevation model; reproject the GeoTIFF from WGS 84 to your local system with Raster > Projections > Warp if you measure distances on it.

Limits

  • One area of up to 400 km², about 20 by 20 km. Smaller areas keep the full 30 m detail.
  • About 30 m between elevation values: a bank, a ditch or a terrace narrower than that does not show. For a plot survey, use a lidar model.
  • The model measures the top of buildings and trees, so the edges of forests and buildings read as steep ground.